Water Heater Repair In Miami-dade County, Broward County, Westpalmbeach County
Our company's engineers have extensive practical experience in repairing water heaters of various brands and models. Owners of equipment that has worked for several months and many years turn to us. In most cases, the master can determine the cause of the defect during a telephone conversation and goes to the customer with the necessary set of spare parts.
Benefit of Service
Repair technology
Repair technology may include the following types of work:
- Corrosion of the boiler tank entails complex repairs. Our specialists have the necessary equipment, and high qualification allows us to eliminate such defects without replacing the tank. Small holes are brewed, a long-term warranty is given for the work.
- In the absence of water heating, electrical equipment is tested first. In some cases, it is necessary to change the thermostat, fuses or cut-off. Most often, the cause of the breakdown is the failure of the heating element. Replacement of a part with a similar spare part is performed after draining the liquid from the tank. Depending on the model, the work may take from 0.5 to 1.5 hours, after which the equipment is checked for operability.
- Weak water pressure is also considered a common breakdown. In most cases, it is sufficient to clean the fuse valve from dirt and scale, after which the operability of the equipment is restored.
- The replacement of the plug or socket is carried out by our employees with excessively strong heating. In some cases, the owner is given recommendations for replacing the wiring with a more powerful one. It may be necessary to connect the device to the grounding system.
- Our specialists often have to correct mistakes made during the installation of equipment. If the boiler heats an insufficient volume of water, most likely the equipment was incorrectly connected to the pipeline system at the facility.
The scope of work may include replacement or repair, installation of new gaskets and seals, restoration of tightness of connections.
All operations are performed as quickly and efficiently as possible, with the provision of warranty obligations. Contacting our service center is an opportunity to quickly solve problems with the boiler, fix existing defects with minimal time and money. To place an order, just call us or leave a request on the website.
The advantages of contacting our company are the high quality of diagnostics and repairs, the availability of experienced specialists with appropriate qualifications, equipped with modern equipment. Prices for the company’s services depend on the complexity of repair and restoration work and are calculated after determining the cause of the breakdown. We are confident in our specialists and the quality of their services. Therefore, we offer a 2-year warranty for work and spare parts.
Why choose us
Our company has been repairing water heaters since its foundation. We work with water heaters of different brands and models.
The advantages of contacting our service center include:
- The company’s specialists are constantly trained and highly qualified in the repair of boilers of various brands and models.
- Employees have modern equipment available, with the help of which it is possible to carry out repairs as efficiently and quickly as possible.
- All breakdowns are eliminated at the customer’s home, without transporting the equipment to the service center.
- The cost of services depends on the complexity of repair work and installed spare parts, is affordable and profitable compared to market prices.
- Orders are accepted daily, departure is possible at any time at the request of the customer.
In situations where the water heater starts to malfunction or stops functioning, it is best to contact our service center. The company’s specialists will promptly diagnose, identify the causes of failures and offer solutions to the problem. High-quality spare parts and accessories are used for repairs. Warranty obligations are provided for all works and installed parts. In order to call the master, it is enough to call us or place an application on the company’s website.
Diagnostics and repair of water heaters
Electric heaters of various brands are in demand on the market as one of the optimal options to provide a residential or industrial facility with hot water. The equipment differs in technical characteristics, such as power, tank volume, connection type, liquid heating rate. Installation of boilers should be carried out by qualified craftsmen in order to avoid errors and premature breakdowns. If a malfunction is detected during operation, diagnostics and repairs can be performed by our service center engineers.
Traditional breakdowns of electric water heaters
Modern electric water heaters are characterized by high reliability and performance. Equipment breakdowns are recorded quite rarely. The main causes of defects are errors in connection, installation and configuration, problems with power supply, lack of grounding.
Boilers fail in the absence of periodic maintenance, when the owner forgets to diagnose and eliminate potential defects in time. The use of low-quality water leads to increased scale formation, due to which the heating elements burn out prematurely. Factory defects are recorded quite rarely, but it is impossible to completely exclude such an option. Most often, electric heaters produced by companies unknown on the market turn out to be defective.
The main defects of electric heaters of various brands are:
- Failure of heating elements due to scale formation.
- Leaks formed due to corrosion processes are considered to be one of the most difficult breakdowns. In some cases, it is possible to brew the tank, but most often a complete replacement of the electric heater is required.
- Leaks can also be fixed at the places where the boiler is connected to the supply and discharge network. For repairs, it is enough to replace gaskets and seals, restore the tightness of the system.
- A weak set at the outlet of the tank can be caused by the formation of scale in the safety valve or mixer. Such a malfunction is eliminated quickly enough if there is sufficient experience, skills and appropriate equipment.
- In some cases, weak water heating or its absence is due to the failure of the sensor, which incorrectly displays the temperature of the liquid inside the tank.
- The reasons for contacting the service center may be problems with the wiring, socket and electronics of the boiler. An experienced master will quickly determine the actual cause and perform work to eliminate defects.
Owners of water heaters can contact the service center due to poor-quality operation of equipment. Often slow heating of water is fixed due to incorrect connection of the boiler, when the installers have mixed up the pipes.
All these reasons are promptly and efficiently repaired by employees of our company. Experienced engineers will identify a defect on any type of equipment, after which they will offer an affordable and optimal option for restoring equipment.
How is the water heater repaired
The breakdown of the heating element is the main reason for the owners of boilers to contact our service center. In some situations, it is possible to restore the functionality of the existing one, in other cases, replacement of the module is required.
The technology for restoring the boiler ‘s operability is as follows:
- The equipment is disconnected from the power supply network, the water supply is blocked, the remaining liquid is drained from the tank. To do this, it is enough to open the hot water tap and substitute the container.
- The electrical wiring is disconnected from the back of the heating element, after which the fixing nuts are screwed. The heating element is removed from the tank.
- The condition of the inner part of the tank is checked, if necessary, its descaling is carried out. In some cases, it is necessary to replace the gasket that ensures the tightness of the equipment.
- The heating element is inspected for defects. If the water in the tank was heating up, but the process was slow, the heating element simply needs to be descaled. For this purpose, a mechanical tool and special tools are used.
- If the water in the tank was not heated, the heating element must be changed to a similar model.
- The installation of the heating element, the wiring connection and the start of the water heater in operation are carried out in reverse order.
Replacing the thermostat on the boiler is even easier. To do this, it is enough to dismantle the protective cover, unscrew the locking nuts and remove the failed element. A similar spare part is used for replacement. The repair of the tank associated with the occurrence of leaks is carried out with the use of welding equipment by qualified craftsmen.
Our company is engaged in the repair of electric water heaters. The experience and professionalism of our employees allows us to identify and eliminate the most complex breakdowns. The engineers of the service center are equipped with modern equipment, the use of which makes repairs and prevention more prompt and high-quality. You can make an application and call the master at any time. To do this, just call us or fill out the feedback form on the website.